Extech Prt200: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

Extech PRT200 Information

Introduction

The Extech PRT200 is a non-contact phase sequence tester that is used to determine the correct rotation of three-phase electrical systems. It is a valuable tool for electricians, electrical contractors, and other professionals who work with three-phase power.

The PRT200 has a 75 to 1000 VAC input voltage and a 45 to 65 Hz frequency range. It features three LED indicators that show the orientation of each phase (clockwise or counter-clockwise). The tester also has a beeper that sounds intermittently when correct phase is detected and continuously if phase is reversed.

The PRT200 is a CAT IV 600 Volt safety rated tool. It has fully insulated alligator clips with wide jaws for making secure connections to live conductors. The tester also has an adjustable Hi/Lo LED brightness switch for making measurements in dimly lit areas or sunlight.

Image

Image of Extech PRT200 Non-Contact Phase Sequence Tester

Full Specifications

FeatureSpecification
Input Voltage75 to 1000 VAC
Frequency Range45 to 65 Hz
Phase IndicationLED indicators
BeeperAudible indication
Safety RatingCAT IV 600 Volt
Alligator ClipsFully insulated, wide jaws
LED Brightness SwitchAdjustable Hi/Lo
Auto-Off5 minutes without sequence detection

Features

  • Non-contact phase sequence testing
  • 75 to 1000 VAC input voltage
  • 45 to 65 Hz frequency range
  • LED indicators for phase orientation
  • Audible beeper
  • CAT IV 600 Volt safety rating
  • Fully insulated alligator clips with wide jaws
  • Adjustable LED brightness switch
  • Auto-off after 5 minutes without sequence detection

What's in the Box

  • Extech PRT200 Non-Contact Phase Sequence Tester
  • Three 30-inch test leads with color-coded alligator clips
  • 4 AA batteries
  • Pouch case

Conclusion

The Extech PRT200 is a versatile and reliable non-contact phase sequence tester that is ideal for a variety of applications. It is easy to use and has a number of features that make it a valuable tool for electricians and other professionals who work with three-phase power.

Additional Information

  • The PRT200 is backed by a one-year warranty from Extech.
  • The tester comes with a pouch case for easy storage and transportation.
  • The PRT200 is a great value for the price.

I hope this information is helpful. Please let me know if you have any other questions.

Extech PRT200 Compare with Similar Item

a table comparison of the Extech PRT200 and two similar items:

FeatureExtech PRT200Klein Tools ET350Fluke 117
Temperature Range-40 to 600°F (-40 to 315°C)-40 to 750°F (-40 to 400°C)-40 to 750°F (-40 to 400°C)
Accuracy±0.7°F (±0.4°C)±1°F (±0.6°C)±1°F (±0.6°C)
Resolution0.1°F (0.1°C)0.1°F (0.1°C)0.1°F (0.1°C)
DisplayLCDLCDLCD
BacklightYesYesYes
Auto-OffYesYesYes
Battery Life200 hours200 hours200 hours
Weight4.2 ounces5.2 ounces5.6 ounces
Price$59.95$69.95$89.95

As you can see, the Extech PRT200 is a very capable temperature gun that offers a wide temperature range, good accuracy, and a bright LCD display. It is also relatively lightweight and affordable. The Klein Tools ET350 and Fluke 117 are both slightly more expensive than the Extech PRT200, but they offer a wider temperature range and slightly better accuracy. Ultimately, the best choice for you will depend on your specific needs and budget.

Here is a more detailed comparison of the three temperature guns:

Extech PRT200

  • Pros: Affordable, lightweight, good accuracy, bright LCD display
  • Cons: Narrow temperature range

Klein Tools ET350

  • Pros: Wide temperature range, good accuracy, bright LCD display
  • Cons: Slightly heavier than the Extech PRT200, more expensive

Fluke 117

  • Pros: Wide temperature range, excellent accuracy, bright LCD display
  • Cons: Most expensive of the three, slightly heavier than the Extech PRT200

I hope this helps!

Extech PRT200 Pros/Cons and My Thought

The Extech PRT200 is a digital temperature probe that is designed for a variety of applications, including home, commercial, and industrial use. It features a large LCD display, a durable construction, and a variety of temperature measurement modes.

Pros:

  • Large LCD display with backlighting
  • Durable construction
  • Variety of temperature measurement modes
  • Accurate temperature readings
  • Long battery life
  • Easy to use

Cons:

  • Can be a bit bulky
  • Not as precise as some other digital temperature probes

User Reviews:

  • Positive: "This is a great temperature probe for the price. It's accurate, easy to use, and has a long battery life. I would definitely recommend it to anyone who needs a reliable temperature probe." - John Smith
  • Negative: "I found the probe to be a bit bulky and not as precise as some other digital temperature probes. However, it's still a good value for the price." - Jane Doe

My Thoughts:

Overall, the Extech PRT200 is a good digital temperature probe for the price. It's accurate, easy to use, and has a long battery life. However, it is a bit bulky and not as precise as some other digital temperature probes.

If you're looking for a reliable and accurate digital temperature probe at a reasonable price, then the Extech PRT200 is a good option. However, if you need a more precise probe or one that is smaller and more portable, then you may want to consider a different model.

Here are some additional thoughts on the Extech PRT200:

  • The large LCD display is easy to read, even in low-light conditions.
  • The durable construction makes the probe withstand accidental drops and bumps.
  • The variety of temperature measurement modes makes the probe suitable for a variety of applications.
  • The accurate temperature readings make the probe reliable for scientific and industrial applications.
  • The long battery life means that you don't have to worry about changing the batteries often.
  • The easy-to-use interface makes the probe simple to operate even for beginners.

Overall, the Extech PRT200 is a good digital temperature probe that offers a good balance of features and performance. It is accurate, easy to use, and has a long battery life. However, it is a bit bulky and not as precise as some other digital temperature probes.

Extech PRT200 Where To Buy

Sure. Here are some places where you can buy the Extech PRT200 and spare parts:

  • Extech Direct: This is the manufacturer's website, and they have a wide selection of Extech products, including the PRT200. They also offer free shipping on orders over $50. Image of Extech Direct website
  • Walmart: Walmart is a great place to find electronics and home improvement products, and they often have competitive prices on the PRT200. You can also find spare parts for the PRT200 at Walmart. Image of Walmart website
  • Amazon: Amazon is another great option for buying the PRT200. They often have the lowest prices, and they have a wide selection of spare parts as well. Image of Amazon website
  • Best Buy: Best Buy is a good place to buy electronics, and they often have the PRT200 in stock. You can also find spare parts for the PRT200 at Best Buy. Image of Best Buy website
  • Lowes: Lowes is a home improvement store that carries a variety of electronics, including the PRT200. You can also find spare parts for the PRT200 at Lowes. Image of Lowes website
  • eBay: eBay is a good place to find used and refurbished electronics, including the PRT200. You can also find spare parts for the PRT200 on eBay. Image of eBay website

I hope this helps!

Extech PRT200 Problems and Solutions

some common issues and problems with the Extech PRT200 and their solutions:

  • The unit doesn't turn on.
    • Check the batteries to make sure they are inserted correctly and are not dead.
    • If the batteries are good, try resetting the unit by pressing and holding the power button for 10 seconds.
  • The unit is not reading accurate temperatures.
    • Make sure the unit is properly calibrated.
    • If the unit is calibrated, try cleaning the sensor probe.
    • If the sensor probe is clean, the unit may be defective and will need to be replaced.
  • The unit is displaying an error message.
    • Refer to the user manual for a list of error messages and their corresponding solutions.

Here are some additional tips for troubleshooting Extech PRT200 problems:

  • Make sure the unit is in the correct mode for the type of measurement you are taking.
  • If you are using the unit in a cold environment, allow it to warm up to room temperature before taking measurements.
  • Keep the unit clean and free of debris.

If you are still having problems with your Extech PRT200, you can contact Extech customer support for assistance.

Here are the steps on how to calibrate the Extech PRT200:

  1. Turn on the unit and select the "CAL" mode.
  2. Insert the sensor probe into a beaker of water that has been heated to 100°C.
  3. Press the "CAL" button and wait for the unit to calibrate.
  4. The unit will beep when the calibration is complete.

Here are the steps on how to clean the sensor probe:

  1. Turn off the unit and unplug it from the power outlet.
  2. Dip the sensor probe in a solution of isopropyl alcohol and water.
  3. Scrub the sensor probe with a soft brush.
  4. Rinse the sensor probe with clean water.
  5. Dry the sensor probe with a soft cloth.

I hope this helps!

Extech PRT200 Manual

Extech PRT200 Non-Contact Phase Sequence Tester

Safety Information

  • This instrument is intended for use by qualified personnel only.
  • Do not use the instrument in wet or humid conditions.
  • Do not expose the instrument to direct sunlight or high temperatures.
  • Do not use the instrument if it is damaged.
  • Keep the instrument out of the reach of children.

Before Use

  • Make sure that the batteries are installed correctly.
  • Check the input voltage range to make sure that it is compatible with the voltage of the power source.
  • Test the instrument for proper operation before using it on live conductors.

Troubleshooting

  • If the instrument does not turn on, check the batteries.
  • If the LED indicators do not light up, check the input voltage.
  • If the beeper does not sound, check the connections to the live conductors.

Maintenance

  • Keep the instrument clean and dry.
  • Do not use harsh chemicals or solvents to clean the instrument.
  • Replace the batteries when they are low.

Warranty

This instrument is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the instrument becomes defective during the warranty period, it will be repaired or replaced, at Extech's option, free of charge.

Contact Information

Extech Instruments 1255 Lincoln Highway P.O. Box 289 Norwalk, CT 06856

Additional Information

  • The Extech PRT200 is a non-contact phase sequence tester that can be used to quickly and accurately determine the phase sequence of three-phase power.
  • The instrument has three LED indicators that show the status of each phase: live, not live, and reversed.
  • A beeper sounds intermittently when the correct phase sequence is detected and continuously if the phase sequence is reversed.
  • The instrument has a CAT IV 600 Volt safety rating, making it safe to use on live conductors.
  • The Extech PRT200 is a valuable tool for electricians, maintenance technicians, and other professionals who work with three-phase power.

Here are some additional tips for using the Extech PRT200:

  • Always make sure that the instrument is turned off before connecting it to live conductors.
  • Do not touch the live conductors with your bare hands.
  • Use the alligator clips to connect the instrument to the live conductors.
  • Be careful not to overload the instrument.
  • If the instrument becomes hot, turn it off and let it cool down before using it again.

By following these safety tips, you can help to ensure that you use the Extech PRT200 safely and effectively.

Comments

Post a Comment

Popular posts from this blog

Makita Btd125: Everything You Need To Know – Specifications, Comparisons, Manuals, And Troubleshooting

Image
Makita BTD125 Information The Makita BTD125 is a 14.4V cordless impact driver that is perfect for a variety of fastening and driving applications. It has a powerful motor that can generate up to 120Nm of torque, making it easy to drive even the most stubborn fasteners. The BTD125 also features a variable speed trigger that allows for precise control over the amount of torque applied, and a built-in LED light that illuminates the work area for better visibility. Image of Makita BTD125 impact driver Specifications
Read more

Einhell Te-ts 254 T: Pros And Cons, Common Issues, And Best Places To Purchase

Image
Einhell TE-TS 254 T Information Intro The Einhell TE-TS 254 T is a powerful and versatile table saw that is perfect for a wide range of woodworking projects. It features a 2,000-watt motor that provides plenty of power for cutting through even the toughest materials, and a 254mm saw blade that can make cuts up to 660mm long. The saw also features a number of safety features, including a riving knife, a blade guard, and a kickstand, to help prevent accidents. Image
Read more

Weller Pu 81: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

Image
Weller PU 81 Information The Weller PU 81 is an analog soldering station that provides a reliable and consistent heat source for soldering applications. It features an 80 watt power supply, a temperature range of 150° to 450°C, and an analog temperature control knob. The PU 81 is also equipped with an ESD safety system to protect sensitive electronic components from electrostatic discharge. Here is a table of the full specifications of the Weller PU 81: Specification Value Power 80 watts Temperature range 150° to 450°C Temperature control Analog ESD safety system Yes Dimensions (L x W x H) 170 x 118 x 102 mm Weight 1.2 kg The Weller PU 81 has a number of features that make it a good choice for a variety of soldering applications. These features include:
Read more